Skid Steer Chipper Attachment Standard Flow (5" dia Material)

Price: $13,000.00
(No reviews yet) Write a Review
1,145.00 LBS
Calculated at Checkout

Our line of skid steer chippers attach in seconds and are driven solely by your skid steer's hydraulics. They are available in standard/high flow and high flow models. Either model will make short work of any troublesome debris.

  • Continuous chipping size rating refers to the suggested feeding size of limbs for normal operation
  • This Standard-flow unit requires a minimum of 15-22 gallons per minute (GPM) hydraulic oil flow for 5" dia chipper
How difficult is it to perform maintenance on the machine?
Our chipper is designed with ease of maintenance in mind. Proper maintenance is vital and should be performed routinely with blades, belts and bearings being most important.
How long will the chipper blades last?
Depending on the type of wood, age and cleanliness, chipper blades will work well for between 5-15 hours. Dry, dirty wood will dull the blades faster. Alternate dry and wet material to extend blade life. Hydraulic feed machines will have longer blade life.
What are these skid steer chippers designed for?
The Spartan chipper is designed to effectively eliminate wood, brush, and other organic material while using your skid steer as the power unit.
What is the capacity and hydraulic flow requirements of the skid steer chipper?
The CH450H has a maximum capacity of 4.5"and requires at least 11 to 15 gpm on a mini skid steer. The CH500H has a maximum capacity of 5"and requires at least 15 to 22 gpm on a low-flow skid steer. The CH800H has a maximum capacity of 8" and requires at least 25 to 38 gpm on a hi-flow skid steer.
When should I buy a hydraulic feed machine?
If time or efficiency is an issue, a hydraulic feed chipper allows you to be more productive.
Will the chipper fit my skid steer?
The Spartan CH500H and CH800H skid steer chippers are equipped with universal attachment ends, capable of hooking up to most skid steers.
1 Year Warranty
Chipper Capacity:
5 in dia
1145 lbs
Chipper Blades:
4 reversible steel blades with 4 sided adjustable anvil
Feed Opening:
5.5 x 7 in
Feed System:
Hydraulic Flow Requirement:
15-22 gpm
Discharge Chute:
Standard 360 degree
Chipper Disc:
20x1.25/140 turns at 1675 rpm at 15 gpm; 2930 rpm at 22 gpm
L x W x H:
102" x 58" x 94"

Related Products

Mini Skid Steer Trencher

Our Professional Series Mini Skid Steer Trencher Attachment is the perfect trench digging solution for your mini skid steer or walk behind machine. Cut through the toughest earth with ease with...

Price: $4,930.00

Customers Also Viewed

Mini Skid Steer Chipper

The Spartan Mini Skid Steer chipper attaches in seconds and are driven solely by your mini skid steer's hydraulics. This unit is available as a standard flow model. This unit will make short work...

Price: $5,270.00